Saturday, September 4, 2010

Mini2440 7" Android Image

Want to try Android on Friendly ARM 7" Mini2440? Below are links (zImage,uImage & FS). Its working, but very slow. My guess is, 64MB RAM in my board is the bottle neck. Try and pass your Comments. If any one has a idea for better performance Please Share it.
Due to lack of time I'm cut shorting this post. Hope will get time to explain to all in detail. But if you have questions ask, I will try to address.

1) Click here to Download zImage or uImage. ( Zip File)
2) Below is the link to Download Andorid File System.


-Saravana
Posted by Saravana at 11:09 AM

12 comments:

  1. genkinmaruSeptember 7, 2010 at 1:54 AM

    Hi Saravana,

    Could you re-compress or re-upload the images?
    The zip doesnt seem to work.
    Getting this error:

    error: invalid compressed data to inflate
    bad CRC 71dd1073 (should be 48c3e1b8)

    I've tried it in Vista and Fedora, no luck.

    Carlos M.

    ReplyDelete
  2. SaravanaSeptember 7, 2010 at 10:32 PM

    Hi Carlos,
    I re-uploaded the zip file. Can you check and let me know.

    Regards
    Saravana

    ReplyDelete
  3. genkinmaruSeptember 8, 2010 at 1:32 AM

    It worked, trying the image out right now..

    ReplyDelete
  4. genkinmaruSeptember 16, 2010 at 5:37 AM

    Hi Saravana,

    Here I am again. Im in desperate need of a working config file. I tried to make a kernel image, as small as possible, only need touchscreen 3.5" working and wifi. Could you upload yours or send me or just tell me what Im missing in my configuration?

    When I compile my zImage and try to use it, I get kernel panic, right after the warning: cant open console...or something. I guess you must have compiled a working zImage by now.

    I asked this on the forum, so far no helping answer. Can you help me out?

    Regards

    ReplyDelete
  5. UnknownOctober 5, 2010 at 7:27 AM

    Saravana,

    Congrats on getting this running.

    Shannon Haworth

    ReplyDelete
  6. UnknownOctober 11, 2010 at 5:23 PM

    HI ! I need Toolchain/android-toolchain_20081019-koolu1_i386.deb !!
    Help pls!

    ReplyDelete
  7. Trần Văn TiếnJanuary 16, 2011 at 6:53 AM

    I encountered difficult problem about Android on mini2440 X35
    I already build kernel for it again but not be run on X35.run T35
    What ever you do about android on x35 help me please.
    Thank!

    ReplyDelete
  8. UnknownMarch 4, 2011 at 9:39 PM

    Hi Saravana,
    I dumped your uImage in my SD card and its working fine for touchscreen i also add swap partition of 1GB but still Android Performance is slow can u upload the changes you have done to calibrate touch screen

    Regards
    Girish
    girish2k44@gmail.com

    ReplyDelete
  9. Vitor ChristoApril 26, 2011 at 10:53 PM

    I have the some problem, plase some on help?

    I encountered difficult problem about Android on mini2440 X35
    I already build kernel for it again but not be run on X35.run T35
    What ever you do about android on x35 help me please.
    Thank!

    ReplyDelete
  10. SaravanaJuly 16, 2011 at 3:17 AM

    Hi all,
    Sorry for not answering your questions. From my analysis Mini2440 is not for Android.The above image which I have is just for proof of concept. this 64 MB ram is the bottle neck. If any one has better idea to android in mini2440 please share.

    Regards
    Saravana








    Regards
    Saravana

    ReplyDelete
  11. ra dSeptember 13, 2011 at 8:18 AM

    what modifications are needed in kernel to run with 7" display? I've some troble with thus problem...

    ReplyDelete
  12. SijoSeptember 28, 2011 at 12:23 AM

    i've loaded ,but the display is blinking, what should i do

    ReplyDelete

Subscribe to: Post Comments (Atom)